Components for Lean structures Download Brochure Download Catalogue

  • Aluminium tubular profile L=4000 mm

    Part-No. EPR1

    Aluminium Profile L = 4000 mm

    Extruded aluminium profile EN AW 6063-T5, anodised finish
    Diameter 35 mm
    Weight 0,83 Kg / lin.m.

  • 90° Joint Kit

    Part-No. EKG1

    90° Joint Kit

    No. 2 die cast half-joints, sandblasted,
    supplied with screw and nut

  • 0°-180° Joint Kit

    Part-No. EKG2

    0°- 180° Joint Kit

    No. 2 die cast half-joints, sandblasted,
    supplied with screw and nut

  • Levelling Foot Kit

    Part-No. EKP1

    Levelling Foot Kit

    Levelling foot with rubber anti-slip plate,
    square Nylon anchor, square nut, hex nut and washer

  • Swivel Stem Caster

    Part-No. EKR5

    Swivel Stem Caster – Ø 100 mm

    Swivel stem caster Series M supplied with square Nylon anchor
    square nut, screw and 2 washers.

  • Swivel Stem Caster with Brake

    Part-No. EKR6

    Swivel Stem Caster with Brake – Ø 100 mm

    Swivel stem caster Series M supplied with square Nylon anchor
    square nut, screw and 2 washers.

  • Swivel Plate Caster

    Part-No. EKR7

    Swivel Plate Caster – Ø 100 mm

    Swivel plate caster Series M supplied with 4 screws, 4 nuts ETFX1
    for profile slot and 4 washers

  • Swivel Plate Caster with Brake

    Part-No. EKR8

    Swivel Plate Caster with Brake – Ø 100 mm

    Swivel plate caster Series M supplied with 4 screws, 4 nuts ETFX1
    for profile slot and 4 washers

  • EKR9_UK

    Part-No. EKR9

    Fixed Caster – Ø 100 mm

    Fixed caster Series M supplied with 4 screws, 4 nuts ETFX1
    for profile slot and 4 washers.

  • EKR10_UK

    Part-No. EKR10

    ESD Swivel Stem Caster – Ø 100 mm

    ESD swivel stem caster supplied with square Nylon anchor
    square nut, screw and 2 washers.

  • EKR11_UK

    Part-No. EKR11

    ESD Swivel Stem Caster with Brake – Ø 100 mm

    ESD swivel stem caster supplied with square Nylon anchor
    square nut, screw and 2 washers.

  • EKR12_UK

    Part-No. EKR12

    ESD Swivel Plate Caster – Ø 100 mm

    ESD swivel plate caster supplied with 4 screws, 4 nuts ETFX1
    for profile slot and 4 washers.

  • EKR13_UK

    Part-No. EKR13

    ESD Swivel Plate Caster with Brake – Ø 100 mm

    ESD swivel plate caster supplied with 4 screws, 4 nuts ETFX1
    for profile slot and 4 washers.

  • EKR14_UK

    Part-No. EKR14

    ESD Fixed Caster – Ø 100 mm

    ESD fixed caster supplied with 4 screws, 4 nuts ETFX1
    for profile slot and 4 washers.

  • EKR15_UK

    Part-No. EKR15

    Swivel Plate Caster – Ø 100 mm

    Swivel plate caster Series P supplied with 4 screws, 4 nuts ETFX1
    for profile slot and 4 washers

  • EKR16 _UK

    Part-No. EKR16

    Swivel Plate Caster with Brake – Ø 100 mm

    Swivel plate caster Series P supplied with 4 screws, 4 nuts ETFX1
    for profile slot and 4 washers

  • EKR17 _UK

    Part-No. EKR17

    Fixed Caster – Ø 100 mm

    Fixed caster Series P supplied with 4 screws, 4 nuts ETFX1
    for profile slot and 4 washers

  • EKR18_UK

    Part-No. EKR18

    Swivel Plate Caster – Ø 150 mm

    Swivel plate caster Series ML supplied with 4 screws, 4 nuts ETFX1
    for profile slot and 4 washers

  • EKR19_UK

    Part-No. EKR19

    Swivel Plate Caster with Brake – Ø 150 mm

    Swivel plate caster Series ML supplied with 4 screws, 4 nuts ETFX1
    for profile slot and 4 washers

  • EKR20_UK

    Part-No. EKR20

    Fixed Caster – Ø 150 mm

    Fixed caster Series ML supplied with 4 screws, 4 nuts ETFX1
    and 4 washers

  • Profile End Cap

    Part-No. ECP1

    Profile End Cap

    Nylon push fit end cap with grey finish

  • Nut for Profile Slot

    Part-No. ETFX1

    Nut for Profile Slot

    M6 steel nut to suit EPR1 profile slots. It can be
    installed anywhere along the profile T-slot

  • Right Angle Mounting Bracket

    Part-No. E837

    Right Angle Mounting Bracket

    35 x35 steel mounting bracket
    with clearance slots for M6 screws

  • EDC841_UK

    Part-No. EDC841

    Universal Connecting Plate

    30 x 80 mm aluminium universal connecting plate.
    It can be used to connect the tubular profile EPR1 with
    any T-slotted aluminium profile

  • EDC790_UK

    Part-No. EDC790

    Worktop Mounting Bracket

    Steel worktop mounting bracket. Quick, easy and secure.

Components for gravity flow racks Download Brochure Download Catalogue

  • Roller Track Mounting Kit

    Part-No. EKSR1

    Roller Track Mounting Kit

    Anodised aluminium profile L = 4000 mm for
    snap-in mounting on profile EPR1 supplied with 4 plastic
    clip strips with long teeth L = 500 mm/each  and 4 plastic
    clip strips with short teeth L = 500 mm/each

  • Roller Track Mounting Kit with End Stop

    Part-No. EKSR2

    Roller Track Mounting Kit with End Stop

    Anodised aluminium profile L = 4000 mm for
    snap-in mounting on profile EPR1 supplied with 4 plastic
    clip strips with long teeth L = 500 mm/each  and 4 plastic
    clip strips with short teeth L = 500 mm/each

  • Roller track mounting profile

    Part-No. EPC818

    Roller Track Mounting Profile

    Anodised aluminium profile L = 4000 mm for
    snap-in mounting on profile EPR1 supplied
    without plastic clip strips

  • Roller track mounting profile with end stop

    Part-No. EPC820

    Roller Track Mounting Profile with End Stop

    Anodised aluminium profile L = 4000 mm with end stop
    for snap-in mounting on profile EPR1 supplied
    without plastic clip strips

  • Plastic clip strip with long teeth

    Part-No. C40300

    Plastic Clip Strip with Long Teeth

    Plastic clip strip with long teeth L = 500 mm 

  • Plastic Clip Strip with Short Teeth

    Part-No. C40301

    Plastic Clip Strip with Short Teeth

    Plastic clip strip with short teeth L = 500 mm

  • Normal Roller Track

    Part-No. C514

    Normal Roller Track

    Length 4000 mm
    Roller pitch: 33 mm
    Max recommended load for each roller track: 40 Kg per meter uniformly distributed.
    Recommended for heavy weight applications

  • Flanged Roller Track

    Part-No. C515

    Flanged Roller Track

    Length 4000 mm
    Roller pitch: 50 mm
    Max recommended load for each roller track: 40 Kg per meter uniformly distributed.
    Recommended for heavy weight applications

  • Normal Roller Track - Light Series

    Part-No. C419

    Normal Roller Track – Light Series

    Length 4000 mm
    Roller pitch: 50 mm
    Max recommended load for each roller track: 40 Kg per meter uniformly distributed.
    Recommended for light weight applications or empty boxes return

  • ESD Roller track

    Part-No. C160

    ESD Roller Track

    Length 4000 mm
    Roller pitch: 33 mm
    Coefficient of resistance: 28,8 Ω/cm2

  • Lateral Guide

    Part-No. E516

    Lateral Guide L

    Length 4000 mm. Material: PVC
    It slides onto roller track Part-No. C514

  • Lateral guide M

    Part-No. E596

    Later Guide M

    Length 4000 mm. Material: PVC
    It slides onto roller track Part-No. C514

  • Central Guide

    Part-No. E538

    Central Guide

    Length 4000 mm. Material: PVC

  • Central Guide Holder

    Part-No. E542

    Central Guide Holder

    Material: steel. It is used for fixing the central guide
    E538 to the roller mounting kits

  • Roller track mounting clip

    Part-No. E867

    Roller Track Mounting Clip

    It can be used to fix the roller track to the profiles EKSR1 and
    EKSR2 by replacing the plastic clip strips.
    Recommended for ESD applications

  • Roller tracks connector

    Part-No. E868

    Roller Tracks Connector

    It allows to join roller tracks together by means of
    screws or rivets.
    A supporting traverse is required under the connector

  • Brake

    Part-No. C527

    Brake

    Material: steel 
    It prevents the load from moving any further

  • Anti-return buffer

    Part-No. E869

    Anti-Return Buffer

    Material: plastic with a steel axle.
    The tilting buffer makes it possible to bring goods in and block them
    so that they cannot roll backwards. Quick and easy to install.
    You only need to replace the wheel

  • Anti-opening clip

    Part-No. E870

    Anti-Opening Clip

    For snap-in mounting on the rail.
    It prevents the rail from opening due to heavy
    impact on the roller track

  • Roller Track Holding Spring Clip

    Part-No. E836

    Roller Track Holding Spring Clip

    Spring clip for holding the roller track firmly in place

  • Tilt Bar L = 400 mm

    Part-No. EDC833

    Tilt Bar L = 400 mm

    Material: galvanised steel sheet.
    Width 20 mm,  2 mm thick

  • Tilt Bar L = 300 mm

    Part-No. EDC834

    Tilt Bar L = 300 mm

    Material: galvanised steel sheet.
    Width 20 mm,  2 mm thick

  • Tilt Bar L = 200 mm

    Part-No. EDC835

    Tilt Bar L = 200 mm

    Material: galvanised steel sheet.
    Width 20 mm,  2 mm thick

Accessories Download Brochure Download Catalogue

  • Sliding Nut

    Part-No. W83

    Sliding Nut

    Polydur sliding nut to suit EPR1 profile slots.
    Used for hanging tools and balancers 

  • Clear self-adhesive Label Holder

    Part-No. C840

    Clear self-adhesive Label Holder

    100 x 40 mm self-adhesive  label holder. It has an adhesive
    strip on the back for easy application on our profiles
    EKSR1, EKSR2 and EPR1. The swing-up front part is open
    at the top. The aggressive tape on the reverse and the
    swing-up front part provide a secure hold.

  • E871_UK

    Part-No. E871

    Sealing Strip S – Grey

    EPDM rubber compression sealing strip to seal the slots of the
    profile EPR1. The joints can be mounted directly after strip insertion.
    Supplied in 50 m coils.
    Further colours upon request (min. order: 1500 m)

  • E915_UK

    Part-No. E915

    Sealing Strip M – Grey

    PVC 70 SH compression sealing strip to seal the slots of the
    profile EPR1. It provides protection for sensitive parts.
    The joints can be mounted directly after strip insertion.
    Supplied in 50 m coils.
    Further colours upon request (min. order: 1000 m)

  • E916_UK

    Part-No. E916

    Sealing Strip L – Yellow

    PVC 70 SH sealing strip. It provides protection against hits.
    Supplied in 50 m coils.
    Further colours upon request (min. order: 500 m)

  • E910_UK

    Part-No. E910

    Tubular Profile Protection – Black

    Polyethylene-based foam tubular profile protection, 6 mm thick, Ø 35 mm, L=2000 mm with scratch resistant plastic protective film, washable.

  • E911_UK

    Part-No. E911

    Tubular Profile Protection – Silver Grey

    Polyethylene-based foam tubular profile protection, 6 mm thick, Ø 35 mm, L=2000 mm with scratch resistant plastic protective film, washable.

  • W523_UK

    Part-No. W523

    Spring Towbar with Jaw Coupling

    Provided with a strong spring which keeps the towbar in vertical
    position when not in use.

  • EKSR5_UK

    Part-No. EKSR5

    Free Profiles Rotation Device

    By means of two EKSR5 a profile can be fixed to a structure
    while being able to rotate freely.

  • EDC883_UK

    Part-No. EDC883

    Container for Counterweight Plates

    Material: zinc coated sheet. To be filled with the
    counterweight plates EDC884.

  • EDC884_UK

    Part-No. EDC884

    Counterweight Plate

    Material: zinc coated sheet. Plate weight: 3,5 kg. The number of plates
    to be used depends on the weight of the boxes.

  • Floor angle bracket

    Part-No. EDC842

    Floor Angle Bracket

    Floor angle bracket to securely fix the Easysae structures to the floor

  • EDC934_UK

    Part-No. EDC934

    Tubular Connector

    Manufactured from galvanized steel (plate dimensions 50x80 mm,
    h. 150 mm).
    It can be used to connect the tubular profile EPR1 with our
    60x50 mm slotted aluminium profile

  • EDC935_UK

    Part-No. EDC935

    Centering Support

    Manufactured from galvanized steel (plate dimensions 50x100 mm,
    h. 45 mm).
    Fixed to our 60x50 mm slotted aluminium profile it is designed
    to stack structures

  • W917_UK

    Part-No. W917

    Set of 2 Guides for Easyshuttle

    They allow for correct alignment between the hand cart and 
    the fixed flow rack.
    Supplied with screws and nuts

  • W926_UK

    Part-No. W926

    Release Unit for Easyshuttle

    When the hand cart is coupled to the fixed flow rack,  
    empty/full boxes can be loaded/unloaded

  • 9022_UK

    Part-No. 9022

    Set of 2 Drawer Runners L=400 mm

    Set of 2 drawer runners L=400 mm.  
    Extension length 281 mm, load capacity 35 kg

  • 9023_UK

    Part-No. 9023

    Set of 2 Drawer Runners L=550 mm

    Set of 2 drawer runners L=550 mm.  
    Extension length 415 mm, load capacity 35 kg

  • 9024_UK

    Part-No. 9024

    Set of 2 Drawer Runners L=700 mm

    Set of 2 drawer runners L=700 mm.  
    Extension length 526 mm, load capacity 35 kg

  • 9025_UK

    Part-No. 9025

    Set of 2 Mounting Bracket for 9022

    Zinc-plated mounting bracket for drawer runners 9022

  • 9026_UK

    Part-No. 9026

    Set of 2 Mounting Bracket for 9023

    Zinc-plated mounting bracket for drawer runners 9023

  • 9027_UK

    Part-No. 9027

    Set of 2 Mounting Brackets for 9024

    Zinc-plated mounting bracket for drawer runners 9024

  • Spring Tool for Joint Fastening

    Part-No. EUT1

    Spring Tool for Joint Fastening

    This tool makes joint fastening fast and easy 

  • W169_UK

    Part-No. W169

    Spring Tool

    It keeps the nuts ETFX1 in position into the
    profile slots while assembling.

  • Fork Tool

    Part-No. EUT2

    Fork Tool

    This tool makes the EKSR1 and EKSR2 aluminium profiles
    snap in mounting and dismounting fast and easy 

  • Cutting Jig for EKSR1 and EKSR2

    Part-No. EUT3

    Cutting Jig for EPC818 and EPC820

    It allows the profile to be surely clamped into a
    vice while cutting. If the cutting operation is performed
    either by using a belt or a disk saw, two cutting jigs are recommended

Components for manual assembly lines

Download Catalogue Download Brochure
  • EAC843 Pallet with rotating plate

    Part-No. EAC843

    Pallet with Rotating Plate 300×300 mm

    Pallet with rotating plate 300 x 300 mm 
    Material: PVC, black, 15 mm thick
    Supplied with frame, pallet bushings, pivoting wheels, and pallet rotation stopper

  • Pallet with rotating plate 300x400mm

    Part-No. EAC844

    Pallet with Rotating Plate 300×400 mm

    Pallet with rotating plate 300 x 400 mm 
    Material: PVC, black, 15 mm thick
    Supplied with frame, pallet bushings, pivoting wheels, and pallet rotation stopper

  • Pallet with rotating plate 400x400 mm

    Part-No. EAC845

    Pallet with Rotating Plate 400×400 mm

    Pallet with rotating plate 400 x 400 mm 
    Material: PVC, black, 15 mm thick
    Supplied with frame, pallet bushings, pivoting wheels, and pallet rotation stopper

  • Pallet with fixed carrying plate 300x300 mm

    Part-No. EAC849

    Pallet with fixed Carrying Plate 300×300 mm

    Pallet with fixed carrying plate 300 x 300 mm 
    Material: PVC, black, 10 mm thick
    Supplied with frame, pallet bushings, pivoting wheels

  • Pallet with fixed carrying plate 300x400 mm

    Part-No. EAC850

    Pallet with fixed Carrying Plate 300×400 mm

    Pallet with fixed carrying plate 300 x 400 mm 
    Material: PVC, black, 10 mm thick
    Supplied with frame, pallet bushings, pivoting wheels

  • Pallet with fixed carrying plate 400x400 mm

    Part-No. EAC851

    Pallet with fixed Carrying Plate 400×400 mm

    Pallet with fixed carrying plate 400 x 400 mm 
    Material: PVC, black, 10 mm thick
    Supplied with frame, pallet bushings, pivoting wheels

  • Straight pallet guide

    Part-No. WBC594

    Straight Pallet Guide

    Aluminium straight pallet guide L = 2000 mm
    supplied with screws

  • 90° curve

    Part-No. WBC543

    90° Curve

    Aluminium 90° curve supplied with screws
    Outside diameter: 350 mm

  • Pallet stopper

    Part-No. WAC481

    Pallet Stopper

    Pallet stopper supplied with screws and bushings

  • Frame for rotating plate 300x300 mm

    Part-No. EBC846

    Frame for Rotating Plate 300×300 mm

    Frame for rotating plate 300 x 300 mm 
    realized with the EPR1 tubular profile
    and supplied with all the accessories

  • Frame for rotating plate 300x400 mm

    Part-No. EBC847

    Frame for Rotating Plate 300×400 mm

    Frame for rotating plate 300 x 400 mm 
    realized with the EPR1 tubular profile
    and supplied with all the accessories

  • Frame for rotating plate 400x400 mm

    Part-No. EBC848

    Frame for Rotating Plate 400×400 mm

    Frame for rotating plate 400 x 400 mm 
    realized with the EPR1 tubular profile
    and supplied with all the accessories

  • Rotating plate 300x300 mm

    Part-No. WDC584

    Rotating Plate 300×300 mm

    Rotating plate 300 x 300 mm 
    Material: PVC, black, 15 mm thick

  • Rotating plate 300x400 mm

    Part-No. WDC585

    Rotating Plate 300×400 mm

    Rotating plate 300 x 400 mm 
    Material: PVC, black, 15 mm thick

  • Rotating plate 400x400 mm

    Part-No. WDC586

    Rotating Plate 400×400 mm

    Rotating plate 400 x 400 mm 
    Material: PVC, black, 15 mm thick

  • Rotating pin

    Part-No. WBC783

    Rotating Pin

    It enables the rotation of the pallet 
    Supplied with a special M6 screw, hole spacer and nut

  • Pivoting wheel

    Part-No. WBC786

    Pivoting Wheel

    Steel pivoting wheel supplied with  
    holder, bearing and fastening elements

  • Pallet bushing

    Part-No. WBC785

    Pallet Bushing

    Brass pallet bushing supplied with fastening elements

  • Ball roller

    Part-No. WBC784

    Ball Roller

    Ball material: steel 
    Housing material: aluminium
    Supplied with fastening elements

  • Pallet rotation stopper

    Part-No. WBC787

    Pallet Rotation Stopper

    Pallet rotation stopper supplied with  
    holder and fastening elements

  • Fixed carrying plate 300x300 mm

    Part-No. WDC587

    Fixed Carrying Plate 300×300 mm

    Fixed carrying plate 300 x 300 mm 
    Material: PVC, black,  10 mm thick

  • Fixed carrying plate 300x400 mm

    Part-No. WDC588

    Fixed Carrying Plate 300×400 mm

    Fixed carrying plate 300 x 400 mm 
    Material: PVC, black, 10 mm thick

  • Fixed carrying plate 400x400 mm

    Part-No. WDC589

    Fixed Carrying Plate 400×400 mm

    Fixed carrying plate 400 x 400 mm 
    Material: PVC, black, 10 mm thick

  • Frame for fixed carrying plate 300x300 mm

    Part-No. EBC852

    Frame for fixed Carrying Plate 300×300 mm

    Frame for fixed carrying plate 300 x 300 mm 
    realized with the EPR1 tubular profile
    and supplied with all the accessories

  • Frame for fixed carrying plate 300x400 mm

    Part-No. EBC853

    Frame for fixed Carrying Plate 300×400 mm

    Frame for fixed carrying plate 300 x 400 mm 
    realized with the EPR1 tubular profile
    and supplied with all the accessories

  • Frame for fixed carrying plate 400x400 mm

    Part-No. EBC854

    Frame for fixed Carrying Plate 400×400 mm

    Frame for fixed carrying plate 400 x 400 mm 
    realized with the EPR1 tubular profile
    and supplied with all the accessories